Settlement System (VW)

Description

The Model 4660 Vibrating Wire Settlement System uses a Pressure Transducer attached to a settlement plate located in the settling ground. The sensor is connected, via two fluid filled tubes extending laterally, to a reservoir located on firm ground away from the area of anticipated movement. Fluid pressure within the tubes is sensed by the transducer which provides a measure of the elevation difference between the sensor and the reservoir. The tubes are flushable and the closed loop vented transducer/reservoir system is not influenced by barometric pressure.

Spesification

  • Standard Ranges¹ : 7, 17 m
  • Resolution : 0.025% F.S.
  • Sensor Accuracy² : ±0.1% F.S.
  • Temperature Range¹ : −20°C to +80°C
  • Length × Diameter : 152 × 51 mm (reservoir), 168 × 25 mm (sensor)
  • Length × Width × Height : 305 × 305 × 6 mm (plate), 305 × 127 × 45 mm (cover)

Reviews

There are no reviews yet.

Be the first to review “Settlement System (VW)”

Your email address will not be published. Required fields are marked *