Pile Tip Type (VW)

Pile Tip Type (VW)



The Model 4855 Pile Tip Pressure Cell is used to measure pile-tip loads in cast-in-place concrete piles (caissons). Like the Model 4810, the Pile Tip Pressure Cell has a thick upper plate. The cell is manufactured to be close to the diameter of the pile and the back plate is supplied with hooks or sections of rebar to allow the cell to be connected to the bottom of the reinforcement cage. A vibrating wire pressure transducer is connected to the cell to provide some redundancy in the event that one transducer is damaged during installation. An added feature is a remote re-pressurization mechanism to allow the cell to be inflated slightly so as to ensure good contact between the cell and the surrounding concrete.*


Standard Ranges¹ 2, 3, 5, 7.5, 10, 20 MPa
Over Range 150% F.S. (maximum
Resolution 0.025% F.S.
Accuracy² ±0.1% F.S.
Temperature Range¹ −20°C to +80°C
Height × Diameter¹             50 × 600 mm