Shaft type Brushless Rotary Torque Sensor | DRVL
Shaft type Brushless Rotary Torque Sensor | DRVL

Shaft type Brushless Rotary Torque Sensor | DRVL

Accurate and Maintenance-Free, with Built-In Signal Conditioning
Category: Tags: ,

Description

The DRVL non-contact torque sensor series manufactured by ETH Messtechnik in Germany builds on the existing DRFL series with some significant improvements.  Its integral signal conditioner now outputs 2 standard signals of (10V and 10kHz ± 5kHz) with a bandwidth of 200Hz as standard, while a conditioner with a 1kHz bandwidth is optional.

The output level for speed and angle signals can now be adjusted from 5V up to 24V making it compatible with PLC acquisition units and many more evaluation devices.

Accuracy is guaranteed to <±0.1% of the rated capacity and there are also higher accuracy versions available to <±0.05%.

They feature extended surge tests to ensure better electromagnetic compatibility protecting the sensor from unwanted electromagnetic interference and damage.

The DRVL series non-contact torque sensors are directly compatible with the established DRFL making installation fast and simple.  They can also be supplied with optional base and customised couplings to ensure that you achieve the best possible torque measurement whilst making the task of installation as straightforward as possible.

feature

  • Capacities: 0-0.02Nm to 0-20kNm
  • Supply Voltage Range: 10-28.8Vdc
  • ±10Vdc Voltage Output
  • 10 kHz ± 5 kHz (RS422) Output Frequency
  • Non-Linearity: <±0.1%/Rated Capacity (<±0.05% Optional)
  • Optional Speed & Angle Outputs
  • Max Speed: 37,000 rpm (depending on capacity)
  • Customised Couplings Available
  • Maintenance-Free Thanks to its Non-Contact Technology
  • Compatible with the Previous DRFL
  • Integrated Signal Amplifier
  • PLC Compatible for Better Evaluation
  • Enhanced Overvoltage Prevention
  • Versatile 2 Standard Signals 10V and 10kHz ± 5kHz
  • Fast and Simple Installation with a Variety of Mounting Options
  • Optimum Performance Guaranteed with Specially Designed Couplings
  • Improved Electromagnetic Compatibility (EMC)

Specifications

 
Model DRVL DRVL-I DRVL-Ib DRVL-II DRVL-III DRVL-IV DRVL-V DRVL-VI
Torque 0,02 0,05 2 1 5 50 500 2000 10
Ranges 0,05 0,1 2 10 100 1000 3000 15
(± 0 - ... Nm) 0,1 0,2 5 20 150 1300 4000 20
0,5 10 30 200 1500 5000
1 50 300
Dimensions: (other ranges upon request; General tolerances DIN 2768-m)
L (mm) 82 89 95 110 145 170 270 320 355
B (mm) 32 28 36 42 56 88 105 168
B1 (mm) 24 (→ LK) (→ LK) (→ LK) (→ LK) (→ LK) (→ LK) --
H (mm) 47 54 58 58 73 104 121 185
H1 (mm) 14 14 18 21 28 44 52,5 84
H2 (mm) 22 (→ LK) (→ LK) (→ LK) (→ LK) (→ LK) (→ LK) --
Ø D1 g6 (mm) 3 8 8 10 15 26 45 70 110
Ø D2 g6 (mm) 3 5 6 10 15 26 45 70 110
Ø D3-0,1 (mm) 15 27 32 38 54 80 -- --
Ø LK ± 0,1 (mmm) (→ B1/H2) 32 38 46 65 98 -- --
L1 63 62 68 79 72 84 95 121
L2 7,5 11 14 18 30 45 85 110 115
L3 7,5 10 14 18 30 45 85 110 115
L4 67 66 72 83 78 90 -- --
A1 50 40 56 60 42 46 75 91
A2 24 22 24 32 40 70 85 138
M1 M2,5 x 5 deep M3 x 5 deep M3 x 6 deep M3 x 6 deep M4 x 8 deep M6 x 12 deep M8 x 16 deep M10 x 16 deep
M2 M2,5 x 5 deep M3 x 6 deep M3 x 6 deep M3 x 6 deep M4 x 8 deep M6 x 12 deep -- --
P (DIN 6885) 1 optional -- -- 2xA3x3x14 2x A5x5x25 2x A8x7x40 4xA14x9x80 4x A20x12x100 --
Weight (g) 200 170 340 600 1300 4500 11500 33000
Max RPM 20000 37000 26000 19000 13500 7900 6300 4000

Optional Mounting Base

The DRVL can be offered with an optional base for a simpler assembly and installation.

DRVL Shaft type Brushless Rotary Torque Sensor with Optional Mounting Base
Model DRVL DRVL-I DRVL-Ib DRVL-II DRVL-III DRVL-IV DRVL-V DRVL-VI
Torque Ranges 0,02 0,05 2 1 5 50 500 2000 10
(± 0 - ... Nm) 0,05 0,1 2 10 100 1000 3000 15
0,10 0,2 5 20 150 1300 4000 20
0,5 10 30 200 1500 5000
1 50 300
Dimensions: (other ranges upon request; General tolerances DIN 2768-m)
L (mm) 82 89 95 110 145 170 270 320 355
B (mm) 56 60 78 78 98 158 208 298
B1 (mm) 32 28 36 42 56 88 105 168
B2 (mm) 24 (→ LK) (→ LK) (→ LK) (→ LK) (→ LK) -- --
H (mm) 78 85 85 82 90 172 228,5 316
H1 (mm) 45 45 45 45 45 112 160 215
H2 (mm) 12 12 15 15 15 20 30 40
Ø D1 g6 (mm) 3 8 8 10 15 26 45 70 110
Ø D2 g6 (mm) 3 5 6 10 15 26 45 70 110
Ø D3-0,1 (mm) 15 27 32 38 54 80 -- --
Ø LK ± 0,1 (mm) (→ B2/H3) 32 38 45 65 98 -- --
L1 63 62 68 79 72 84 95 121
L2 7,5 11 14 18 30 45 85 110 115
L3 7,5 10 14 18 30 45 85 110 115
L4 67 66 72 83 78 90 -- --
N1H8 (mm) 6 6 8 8 10 10 10 10
N2 (mm) 2,8 2,8 3,3 3,3 3,3 3,3 3,3 3,3
N3 (mm) 50 50 60 60 60 60 80 100
S1 5,5 5,5 6,6 6,6 9 11 13 17
S2 50 50 50 65 55 65 70 90
S3 44 44 58 58 76 124 156 233
Ø Z E8 4 4 5 5 6 8 10 12
M M2,5 x 5 M3 x 6 M3 x 6 M3 x 6 M4 x 8 M6 x 12 -- --
P (DIN 6885) optional -- -- 2x A3x3x14 2x A5x5x25 2x A8x7x40 4x A14x9x80 4x A20x12x100 --
Weight (g) 400 400 600 900 1600 6600 15 43
Max RPM 20000 37000 26000 19000 13500 7900 6300 4000

Reviews

There are no reviews yet.

Be the first to review “Shaft type Brushless Rotary Torque Sensor | DRVL”

Your email address will not be published. Required fields are marked *

Related products