Pin Load Cell | Shear Pin Load Cell | Force Measuring Pin | DBEP

Category: Tags: ,

Description

Applied Measurements DBEP shear pin load cell design is suitable for the measurement of tensile and compressive forces across a huge range of process monitoring, offshore, civil engineering, industrial, marine and crane/lifting applications.

All of our pin load cells are manufactured from stainless steel and sealed to IP67 as standard to ensure that they are able to stand up to the tough conditions that are commonplace in a typical industrial, marine or offshore application.  We also manufacture custom versions in aluminium alloy, super-duplex stainless steel and titanium where application conditions demand.

We can readily modify any shear pin load cell to make it fully submersible in sea water to depths of 6500 metres or more, and we can also integrate either analogue or digital signal conditioning to provide an output compatible with any existing monitoring or control system.

We offer a range of standard-size pin load cells, although in the vast majority of cases we will design a customised shear pin load cell to be used as a direct replacement for an existing non-load measuring pin, or to meet an exact customer specification.

Feature

  • Capacities: 0-2.5te to 0-50te
  • Output: 1 – 1.5mV/V nominal
  • Environmental Protection: IP67
  • Custom Design Versions
  • Special Ranges: 0-200kg up to 0-1500te
  • Immersion Protected as Standard – For tough industrial, marine and offshore environments.
  • Fully Submersible IP68 versions to depths of 6500m+ Available – Ideal for underwater applications.
  • Bespoke Design to Suit your Application – We offer a full customisation service.

Technical Specifications

Rated Capacity (RC) tonnes 0-0.5, 0-1, 0-2.5, 0-3.5, 0-6.5, 0-15, 0-25, 0-50, 0-100, 0-250, 0-500, 0-750, 0-1000, 0-1500
Operating Modes Tension/Compression / Tension & Compression
Sensitivity (RO) mV/V 1 – 1.5 nominal (dependent on range)
Zero Balance/Offset ±%/Rated Output <1.0
Symmetry (tension vs. compression) ±%/Rated Output <1 typical
Non-Linearity ±%/Rated Capacity <0.5 to 2
Hysteresis ±%/Rated Output <0.5 to 2 typical
Repeatability ±%/Rated Capacity 1 typical *
Temperature Effect on Zero ±%/Rated Output/ ˚C <0.010
Temperature Effect on Sensitivity ±%/Applied Load/ ˚C <0.010
Input Resistance Ohms 375 nominal
Output Resistance Ohms 350 nominal
Insulation Resistance Megohms >5000 @ 50Vdc
Excitation Voltage Volts AC or DC 10 recommended (2-15 acceptable)
Operating Temperature Range ˚C -20 to +70
Compensated Temperature Range ˚C -10 to +50
Storage Temperature Range ˚C -20 to +70
Safe Overload % of Rated Capacity 150
Ultimate Overload % of Rated Capacity 300
IP Rating (Environmental Protection) IP67 (IP68 submersible options)
Weight (excluding cable) See dimension table
Cable Length (as standard) metres 3
Fatigue Life 108 cycles typical (109 cycles on fatigue-rated version)
Cable Type 4-core screened, PUR sheath, Ø5
Construction Material Stainless Steel
Resolution 1 part in 250,000 (with appropriate instrumentation)

Product Dimension

Shear Pin Load Cell Capacity (te)
D
L1
L2
L3
 Weight (kg)
2.5
25
100
70
45
 0.4
3.5
30
105
75
50
 0.6
6.5
40
125
95
63
 1.3
15
50
150
114
75
 2.5
25
63
195
152
89
 4.9
50
75
225
178
102
 8.0

Wiring Details

Wire Designation
Red +ve excitation
Blue -ve excitation
Green +ve signal
Yellow -ve signal
Screen To ground - not connected to load cell body

Reviews

There are no reviews yet.

Be the first to review “Pin Load Cell | Shear Pin Load Cell | Force Measuring Pin | DBEP”

Your email address will not be published. Required fields are marked *

Related products