Submersible_S_Beam_Load_Cell

Submersible S-Beam Load Cell | IP68 Waterproof | DBBSUB

Category: Tags: ,

Description

Applied Measurements DBBSUB submersible S-Beam load cell is ideal for tension and compression measurement in situations involving permanent submersion in water. They are hermetically sealed to IP68 to a depth of 10m/1bar making them ideal for flood susceptible locations, submersible and hydrostatic applications.

The permanently submersible s-beam load cell has a dual bending beam design to ensure inherently high accuracy and enables us to guarantee performance well within specification.

Our DBBSUB permanently submersible load cell can be supplied with specialised rod end bearings further guaranteeing the transducer’s optimum performance. For fast and simple installation they can be supplied with custom designed mounting plates and fixtures.

If you require an IP67 rated S-Beam load cells with capacities of less than 50kg or greater than 10,000kg, our DBBSM series of S-Beam load cells covers load ranges from 0-1kg (10N) up to 0-30,000kg (300kN).  Meanwhile, if you need to fit into a restricted space, Applied Measurements DBBSMM range of miniature S-Beam load cells will fit the bill.

Feature

  • Capacities: 0-0.5kN up to 0-5kN
  • Output: 2mV/V ±0.1%
  • Hermetically Sealed
  • Fully Submersible IP68 Rated to 10m/1bar
  • Simple To Install
  • High Accuracy: <±0.02%/FS
  • Designed for Permanent Long-Term Submersion to 10m/1bar
  • Ideal for Hydrostatic Testing and Off-Shore Applications
  • Hermetically Sealed – Ideal for Harsh Industrial Environments
  • Improved Accuracy – With our specially designed rod end bearings which reduce extraneous forces.
  • Fast and Simple Installation – With standard or customised mounting bases and design fixtures.

Technical Specifications

Rated Capacity (RC) kN 0-0.5, 0-1, 0-2, 0-5
Operating Modes Tension/Compression / Tension & Compression
Sensitivity (RO) mV/V 2 ± 0.1% (1±0.2% on 0.5kN capacity)
Pressure Sensitivity %/FS/bar (metre) <0.05 (<0.005)
Zero Balance/Offset ±%/Rated Output 5
Zero Return after 30 mins ±%/Applied Load <0.02
Output Symmetry (tension vs. compression) ±%/Rated Output <0.1
Non-Linearity ±%/Rated Output <0.02
Hysteresis % / Rated Output <0.02
Repeatability ±%/Rated Output <0.02
Temperature Effect on Zero ±%/Rated Output/˚C <0.002
Temperature Effect on Sensitivity ±%/Rated Output/˚C <0.001
Input Resistance Ohms 1100 ± 50
Output Resistance Ohms 1000 ± 2
Insulation Resistance Megohms >5000 @ 100Vdc
Excitation Voltage Volts AC or DC 10 recommended (2-15 acceptable)
Operating Temperature Range ˚C -40 to +80 (ATEX -40 to +60)
Compensated Temperature Range ˚C -10 to +40
Storage Temperature Range ˚C -40 to +80
Safe Overload % of Rated Capacity 200
Ultimate Overload % of Rated Capacity 300
Maximum Safe Side Load % of Rated Capacity 30
Deflection @ Rated Capacity mm 0.3 nominal
Fundamental Resonant Frequency* Hz see dimensional table
IP Rating (Environmental Protection) IP68 up to 10m water depth/1bar
Weight (excluding cable) kg 0.55
Fatigue Life 108 cycles typical (109 cycles on fatigue-rated version)
Cable Length (as standard) metres 6m
Cable Type Shielded, 4 conductor cable (AWG 24) Ø5mm, Cable jacket polyurethane (PUR)
Construction Material 17-4 PH Stainless Steel Body. 303 Stainless Steel (Cable Gland)
Resolution 1 part in 250,000 (with appropriate instrumentation)
*The resonant frequency is calculated with the body of the load cell attached to a large plate, ensuring that only the sensing element oscillates: This is vital to achieve the highest natural frequency and subsequent frequency response.

Product Dimension

Capacity (kN) H L W Threads T Resonant Frequency Hz
0.5 61.5 61.5 30 M12 400
1 61.5 61.5 30 M12 500
2 61.5 61.5 30 M12 700
5 61.5 61.5 30 M12 1000

All dimensions are in mm

Wiring Details

Wire Designation
Green +ve excitation
Black -ve excitation
White +ve signal
Red -ve signal
Shield To ground - not connected to load cell body

Reviews

There are no reviews yet.

Be the first to review “Submersible S-Beam Load Cell | IP68 Waterproof | DBBSUB”

Your email address will not be published. Required fields are marked *

Related products