OEM Pressure Sensors

Precise, Reliable, One-Offs to High Volume – Made in the UK


Applied measurements specialise in the design and manufacture of OEM pressure sensors. We can manufacture one-offs to high-volume amounts at a relatively low cost and fast scheduled deliveries.

Our OEM pressure sensors are being used to deliver reliable data in vigorous environments and challenging applications worldwide.

All our OEM pressure sensors are designed and manufactured here in the UK by our expert pressure team. Plus, we readily hold stock of component parts in the UK, which means a fast turnaround time for your OEM pressure sensors.

To ensure precision and high accuracy, we use environmental test chambers and automated pressure controllers to calibrate and test your pressure sensors.

Plus, all our equipment is traceable to national UKAS standards to guarantee high reliability and optimum performance.

We can offer superb media compatibility, high-temperature options and a wide range of process connections and mechanical connections, all to suit your specific OEM requirements.

In addition, we can deliver a selection of electrical outputs such as 4-20mA, 0-5Vdc, 0-10Vdc, 0.5-4.5Vdc ratiometric, and mV/V.

We are certain we can design, manufacture, and deliver OEM pressure sensors to suit you whatever your specifications.


  • Ranges: from 0-50mbar up to 0-700bar
    (Higher ranges on request)
  • Outputs: 4-20mA, 0-5Vdc, 0-10Vdc, 0.5-4.5Vdc ratiometric, mV/V
  • Housing Materials: PVDF, 303 Stainless Steel, 316 Stainless Steel, Duplex Stainless Steel, Marine Bronze, Titanium
  • Various Process Connections
  • Range of Back-End Connections
  • UK-Designed & UK-Manufactured
  • High Volume & One-Offs
  • Customer Specific Designs
  • Fast Scheduled Deliveries
  • Pressure Controllers for Accurate Testing and Calibration
  • Environmental Test Chambers for High Reliability



Housing Material
PVDF Polyvinylidene Fluoride Thermoplastic PVDF
303 Stainless Steel 303SS
316 Stainless Steel 316SS
UNS S31803 Duplex Stainless Steel UNS
CA104 Marine Bronze CA104
Titanium T
mV/V un-rationalised 02
2mV/V 07
10mV/V 10
20mV/V 20
4-20mA (2-wire) 42
0.5-4.5Vdc ratiometric (5V excitation) 45
0-5Vdc 05
0-10Vdc 010
Electrical Connection / ATEX Certification
Mini DIN Plug & Socket P
IP65 Cable Gland + Screened, Un-Vented PVC Cable C
M12x1 4-pin Connector M
M12x1 4-pin Connector + Mating Half MM
6-pin Bayonet-Lock Mil-Spec Connector BL
6-pin Bayonet-Lock Mil-Spec Connector + Mating Half BLM
SS = Subsea Connector SS
Pressure Range
0 to 50mbar gauge 50mbarg
0 to 10bar gauge 10barg
-1 to +1bar gauge M1P1barg
0 to 14.5psi absolute 14.5psia
0 to 5psi gauge 5psig
Accuracy (Non-Linearity & Hysteresis)
<±0.25%/FS (standard) A
<±0.1%/FS B
Zero Temperature Compensation (TZS)
<±0.04%/FS/ºC 4
<±0.02%/FS/ºC 2
<±0.01%/FS/ºC 1
Process Connection
G¼” Male DIN 3852 in 303 St/Steel A
G¼” Male DIN 3852 in 316L St/Steel B
¼” NPT Male in 303 St/Steel C
7/16 UNF-20 Male in 3030 St/Steel D
G¼” Female in 303 St/Steel E
G¼” Male DIN 3852 in PVDF (Polyvinylidene Fluoride) F
G¼” Male with 60° Internal Cone in 303 St/Steel G
G¼” Male DIN 3852 in UNS S31803 Duplex St/Steel I
G¼” Male DIN 3852 with Snubber in 303 St/Steel J
¼” NPT Male in PVDF (Polyvinylidene Fluoride) K
M20 x 1.5 Male in 303 St/Steel L
G1/8″ Male DIN 3852 in 303 St/Steel M
½” NPT Male in 303 St/Steel O
G¾” Male DIN 3852 with Semi-Flush Diaphragm in 303 St/Steel P
G½” Male DIN 3852 in 303 St/Steel R
9/16 UNF Internal (no bleed hole) in St/Steel S
O-Ring Material
Viton (FKM) V
Nitrile (NBR) N
EPDM (Ethylene Propylene Diene Monomer) E
Chemraz (Perfluoroelastomer) C
Cable Length (in metres) Various Lengths to Suit



There are no reviews yet.

Be the first to review “OEM Pressure Sensors”

Your email address will not be published. Required fields are marked *