Submersible Depth Sensor | 4-20mA, 0-5V, 0-10V | Pa993

Fully Submersible, Very Compact Ø23mm and Surge Protected


Applied Measurements submersible depth sensor Pa993 is high accuracy, fully submersible and ideal to use in rivers, reservoirs, tanks and channels, submerged pipes and vessels, fountains, boreholes, pots and waters.  It has a slimline 23mm diameter body to suit most underwater pipes.

It uses a state-of-the-art 16-bit microprocessor, embedded within its electronics, enabling it to carry out linearisation and temperature compensation to give you accurate readings to less than ±0.25% of full scale.  If you require higher accuracy, we can also offer this submersible depth sensor with an accuracy of 0.1% or 0.15%.

Thanks to its selection of outputs including 4-20mA (2-wire), 0-5V (3-wire) and 0-10V (3-wire), we are confident that a suitable output can be found for your particular application.  Plus, if you are going to be using a data logger with the depth sensor, a ratiometric output of 0.5-4.5V from a 5V supply can also be offered.

To ensure high integrity underwater, Applied Measurements submersible depth sensor is constructed from 316 Stainless Steel and has a moulded cable exit with vented polyurethane (PUR) cable (NBR and EPDM seals are optional) along with an internal strain wire.  Its IP68 protection rating ensures it can be used at depths of up to 100m in long term submersion in water.

Applied Measurements can also provide a version compatible with seawater if required.  Plus, an internal temperature sensor for temperature and water level readings can be optionally provided.

In addition, the Pa993 submersible depth sensor has a surge protection circuit built-in, which help to lower any effects of close lightning strikes and power supply fluctuations.

If an SDI-12 output is required, please see our Applied Measurements Pa993D SDI-12 submersible depth sensor, which has an accuracy of <±0.15% of full scale as standard.


  • Ranges: 0-0.5mWG up to 0-100mWG
  • 23mm Diameter
  • Outputs: 4-20mA, 0-5V, 0-10V or 0.5-4.5V Ratiometric
  • Environmental Protection: IP68 to 100 metres
  • Accuracy: <±0.25%/FS (Optional 0.1% and 0.15% Versions)
  • Compact 23mm Diameter
  • High Accuracy with 16-Bit Microprocessor
  • Fully Submersible for Long-Term Immersion up to 100m
  • High Integrity Waterproof Assembly
  • Robust Stainless Steel & Piezo-Resistive Silicon Sensing Element
  • Surge Protected from Lightning Strikes & Power Fluctuations


Characteristics Pa9930 Pa9931 Pa9932 Pa9933 Pa9934 Units
Pressure Ranges 0.5, 1, 2.5, 5, 10, 20, 25, 50, 75, 100 metres Water Gauge (mWG)
Safe Overpressure 150 % Pressure Range
Burst Pressure 300
Rated Output 2mV/V 4-20mA 0-5Vdc 0-10Vdc 0.5-4.5Vdc ratiometric
Wiring Configuration 4-wire 2-wire 3-wire 3-wire 3-wire
Supply Voltage 2-10 8-32 8-32 13-32 5 (2.7 – 5.5) Volts DC
Load Driving Capacity N/A 1000 N/A N/A N/A Ohms at Max. Supply Voltage
Electrical Connections Screened polyurethane (PUR) cable with vent tube, strain and drain wire
Accuracy <0.25 (0.1 or 0.15 optional) ±% Pressure Range
Temperature Range Operating -10 to +60 (non-freezing media only) ˚C
Temperature Range Compensated 20±20 ˚C
Temperature Effect on Output <0.015 ±%/˚C
Temperature Effect on Zero <0.02 (0.01 optional) ±%/rated output/˚C
Environmental Protection IP68 to 100mWG (10bar) Moulded Cable Exit
Weight 270 approx. (excluding cable) / Cable = 48/metre grams
Construction 316L St/Steel, Viton + PUR (NBR + EPDM Seals optional)
Electrical Protection EMC Immunity: EN50082-1 & Surge (Lightning) Protection: EN61000-4-5
Supply Reverse Polarity Protection No damage, but also no function

Product Dimensions

submersible depth sensor outline drawing

Wiring Details

Pa993 Wiring Diagram 4-20mA Output (2-wire)

Wire Designation
Red +ve supply
Blue -ve supply & 4-20mA output in series
White to case
Green cable screen

Pa993 Wiring Diagram 0.5-4.5Vdc, 0-5Vdc, 0-10Vdc Output (3-wire)

Wire Designation
Red +ve supply
Blue -ve supply
Yellow +ve signal
White to case
Green cable screen

Pa993 Wiring Diagram mV/V Output (4-wire)

Wire Designation
Red +ve excitation
Blue -ve excitation
White +ve signal
Yellow -ve signal
Green cable screen


Pa9931-10mWG-A2AAV-01-000 (example code) Pa993 1 10mWG A 2 A A V 01 000
Product Family
Pa993 Pa993
Electrical Output
0 = 2mV/V 0
1 = 4-20mA (2-wire) 1
2 = 0-5Vdc (3-wire) 2
3 = 0-10Vdc (3-wire) 3
4 = 0.5-4.5Vdc Ratiometric (3-wire) 4
Pressure Range
10mWG = 0 to 10 metres of water gauge (H2O) 10mWG
10mWA = 0 to 10 metres of water absolute (H2O) 10mWA
10mWSG = 0 to 10 metres of water sealed gauge (H2O) 10mWSG
Accuracy (Non-Linearity & Hysteresis)
A = <±0.25%/FS A
B = <±0.1%/FS B
C = <±0.15%/FS C
Zero Temperature Compensation (TZS)
2 = <±0.02%/FS/ºC 2
1 = <±0.01%/FS/ºC 1
Process Connection
A = Nose Cone A
B = G¼” Male B
Housing Material
A = 316 Stainless Steel A
O-Ring Material
V = Viton (FKM) V
N = Nitrile (NBR) N
Cable Length (in metres)
01 = 1 metre 01
10 = 10 metres 10
Specials Code
000 = No Special Requirements 000


There are no reviews yet.

Be the first to review “Submersible Depth Sensor | 4-20mA, 0-5V, 0-10V | Pa993”

Your email address will not be published. Required fields are marked *