Applied Measurements amplified strain gauge displacement sensor AML/SGDA utilises strain gauge technology to provide a linearly proportional industrial output in relation to the movement of a captivated spindle. Outputs available for the amplified displacement sensor are 4-20mA, 0-5V and 0-10V.
Stroke ranges available are from 0-5mm up to 0-100mm, the strain gauge displacement transducer offers excellent accuracy of better than 0.1% on ranges from 0-5 up to 0-50mm and 0.2% on the 0-100mm versions, along with excellent resolution and long-term stability.
The design principle incorporates a low-noise signal conditioner, avoiding the need for external modules and simplifying the installation and configuration process.
Common applications for Applied Measurements AML/SGDA include Geotechnical Testing, R&D, Aerospace, Civil Engineering and Automotive.
Applied Measurements can supply a wide variety of instrumentation to complement your AML/SGDA amplified strain gauge displacement sensor, such as handheld indicators, digital displays and amplifiers.
Features
Stroke Ranges: 0-5mm to 0-100mm
4-20mA, 0-5V and 0-10V Output
Environmental Protection: IP54
Spring Loaded
High Accuracy:
<±0.1% (0-5mm to 0-50mm)
<±0.2% (0-100mm)
Strain Gauge Design for High Accurate Results
Compact Size & Rugged Construction
Low-Noise Signal Conditioner
Long Life – Reliable and Accurate Even After 10 Million Cycles.
Wide range of standard analogue and digital equipment available.
Operational Notes:
1. The outer case must not be distorted when clamping the sensor. A full diameter clamp is advised.
2. The sensor is not recommended for use is hostile environments without additional protection.
3. Special tools are required to remove the plunger tip (anvil) to avoid damage to the spindle.
4. With the plunger tip (anvil) attached this forms a positive overload protection stop
Product Dimensions
Stroke Range
(mm)
A
B
ØC
5mm
145
114
17.4
10mm
151
114
17.4
25mm
181
119
17.4
50mm
259
179
17.4
100mm
392
264
25.4
AML/SGDA Displacement Sensor Mounting Clamps
Single End Clamp Types:
SMC 17
SMC 20
SMC 25
Materials Clamp Bar Anodised Aluminium
Ring & Fixings Stainless Steel
Note: Clamp bar can be machined to suit applications.
Type
DIM A
Sensor Diameter
SMC-17
110
Ø17.4
SMC-25
115
Ø25.4
Double End Clamp Types:
DMC 17-25
DMC 19-25
Materials Clamp Bar Anodised Aluminium
Ring and Fixings Stainless Steel
ORDERING CODES & OPTIONS
AML/SGDAU10-25mm-002-000 (example code)
AML/SGDA
U10
-
25mm
-
2
-
000
Product Family
AML/SGDA
AML/SGDA
Electrical Output
U = 0-5Vdc
U
U10 = 0-10Vdc
U10
I = 4-20mA
I
Stroke Range
0-5mm
-
5mm
0-10mm
-
10mm
0-25mm
-
25mm
0-50mm
-
50mm
0-100mm
-
100mm
Cable Length (in metres)
0,2 = 0.2 metres
-
0.2
002 = 2 metres
-
2
Specials Code
000 = Standard Product (as per datasheet)
-
000
Code
Details
AML/SGD-DMC17
Double mounting clamp for AML/SGD 0-5mm to 0-50mm ranges
AML/SGD-DMC25
Double mounting clamp for AML/SGD-100mm
AML/SGD-SMC17
Mounting clamp for AML/SGD 0-5mm to 0-50mm ranges
AML/SGD-SMC25
Mounting clamp for AML/SGD-100mm
Reviews
There are no reviews yet.
Be the first to review “Amplified Strain Gauge Displacement Sensor | AML/SGDA” Cancel reply
Reviews
There are no reviews yet.