Addressable In-Place Inclinometer Systems (MEMS)

Description

Addressable In-Place Inclinometer Systems (MEMS) | Model 6150F Series

The Model 6150F MEMS Digital In-Place Addressable Inclinometer consists of a string of Biaxial MEMS Tilt Sensors mounted on lengths of stainless steel tubing, which are cut to customer-specified segment lengths, and interconnected with universal joints. Spring-loaded wheel assemblies are located at each joint and allow the sensor string to positively engage in the grooves of conventional inclinometer casing.

The tilt sensors are connected to each other by means of a four-wire bus cable and the industry standard Modbus® Remote Terminal Unit (RTU) protocol is used to communicate. Automated monitoring is accomplished using the Model 8800 GeoNet Wireless Network Nodes, 8600 Series Dataloggers, sensemetrics Threads, Campbell Scientific Dataloggers or any other device capable of being a Modbus RTU client and having an RS-485 port.

Spesification

  • Range: ±15° (±54000 arcseconds)
  • Resolution¹: ±0.0001° (±0.2 arcseconds)
  • Operating Temperature: −40 °C to +80 °C (−40 °F to +176 °F)
  • Minimum Sensor Spacing: 0.5 m
  • Sensor (L × Ø): 240 × 32 mm (9.50″ × 1.25″)

Reviews

There are no reviews yet.

Be the first to review “Addressable In-Place Inclinometer Systems (MEMS)”

Your email address will not be published. Required fields are marked *