In-Line_Column_Load_Cell

In-Line Column Load Cell | High Capacity | DBCL

Category: Tags: ,

Description

Applied Measurements DBCL high capacity in-line column load cell is suitable for the measurement of tension and compression and are ideal for high force applications where a device with a low diameter is required.

The DBCL load cell is sealed to IP66 as standard and manufactured from stainless steel.  Optionally we can increase the sealing to IP68 for tough marine and offshore applications where submersion depths of 6500 metres or more can be catered for if required.  Integrated signal conditioning is also available with the choice of various analogue and digital outputs.

Our standard DBCL high capacity in-line column load cell design is available in capacities up to 150 tonnes, however, we can supply much larger versions on request.  To date the largest custom high capacity in-line column load cell we have supplied had a capacity of 1500 tonnes.

Feature

  • Capacities: 0-1te up to 0-150te
  • Output: 1.5mV/V
  • Environmental Protection: IP66
  • Submersible Versions Available (IP68)
  • Special Capacities To 1500te+
  • Tough Marine and Underwater Submersible Versions Available
  • High-Pressure Water Jet Protection as Standard – For use in Most Industrial Environments
  • Optimise Signal Integrity and Reduce Noise – With our Integrated Signal Conditioning Options

Technical Specifications

Rated Capacity (RC) tonnes 0-1, 0-2, 0-3, 0-5, 0-7.5, 0-10, 0-20, 0-30, 0-50, 0-75, 0-100, 0-150
Operating Modes Tension/Compression / Tension & Compression
Sensitivity (RO) mV/V 1.5 (nominal)
Zero Balance/Offset ±%/Rated Output <2.0
Output Symmetry (tension vs. compression ±%/Rated Load <0.1% typical
Accuracy ±%/Rated Load <0.20
Non-Linearity ±%/Rated Output <0.20
Hysteresis ±%/Rated Output <0.20
Repeatability ±%/Rated Output <0.10
Temperature Effect on Zero ±%/Rated Output/ ˚C <0.010
Temperature Effect on Sensitivity ±%/Applied Load/ ˚C <0.010
Bridge Resistance Ohms 1te: 350Ω , 2 to 50te: 700Ω , 15 to 150te: 1400Ω
Insulation Resistance Megohms >5000 @ 50Vdc
Excitation Voltage Volts AC or DC 10 recommended (2-15 acceptable)
Operating Temperature Range ˚C -20 to +70
Compensated Temperature Range ˚C -10 to +50
Storage Temperature Range ˚C -20 to +70
Safe Overload % of Rated Capacity 150
Ultimate Overload % of Rated Capacity 300
Deflection @ Rated Capacity Consult sales
IP Rating (Environmental Protection) IP66 (IP67 or IP68 submersible optional)
Weight (excluding cable) See dimension table
Fatigue Life 108 cycles typical (109 cycles on fatigue rated version)
Cable Length (as standard) metres 5
Electrical Connection 6-pin bayonet lock connector with 5m mating cable assembly
Construction Material Stainless Steel
Resolution See dimension table
Note: The DBCL is calibrated in compression only as standard. Calibration in tension is available for an additional charge.

Product Dimension

Capacity (te)
B
C
ØD
Thread T
 Weight
kgs		 Resolution
(tonnes)
1, 2
76
16
31
M12x1.25
 0.4 0.001; 0.002
3, 5
84
22
38
M20x1.5
 0.7 0.005
7.5, 10
108
29
44
M24x2
 1.3 0.01
20
203
50
57
M36x3
 3.3 0.02
30, 50
355
89
114
M64x4
 20 0.02; 0.05
75, 100
458
100
130
M100x3
 35.7 0.05; 0.1
150 458 100 156 M100x3 40.5 0.2

Reviews

There are no reviews yet.

Be the first to review “In-Line Column Load Cell | High Capacity | DBCL”

Your email address will not be published. Required fields are marked *

Related products