Platform_Load_Cell_|_Single_Point_Load_Cell

Platform Load Cell | Single Point Load Cell

Category: Tags: ,

Description

Applied Measurements low profile single point platform load cell OBUG is designed for use in weighing scales and a wide selection of low range force measurement applications such as manufacturing, testing, research and development.  It is primarily designed for compression measurements, but it can also measure tension loads, or it can be used bi-directionally.

The dual cantilever design of the single point platform load cell makes them insensitive to bending moments and also offers extremely high accuracy and stability, while aluminium construction ensures light weight and low cost.

Applied Measurements can provide customised versions of the single point platform load cell with dimensions and fixings to allow direct retro-fitment in place of obsolete products or to suit specific applications are available on request.

Feature

  • Capacities: 0-250g up to 0-40kg
  • Output: 2mV/V
  • Environmental Protection: IP65 (2kg and below)
  • Environmental Protection: IP67 (3kg and above)
  • High Accuracy: <±0.03%/RC
  • Customised Versions Available
  • ATEX Certificate: EEx ia IIC T4
  • Designed for Low Range Measurement Applications
  • Ideal in Weighing Scales
  • Suitable for Industrial Environments
  • Ideal for Retrofitting
  • Lightweight & Low Cost
  • High Accuracy Guaranteed
  • Customised Versions to Suit Your Application
  • Immersion Protection up to 1m on Request

Technical Specifications

CHARACTERISTICS OBUG OBUG OBUC UNITS
Rated Capacity (RC) 0-0.25, 0-0.5, 0-1, 0-2 0-3, 0-5, 0-10, 0-15, 0-20, 0-30, 0-40 0-10, 0-15, 0-20, 0-30, 0-50, 0-100, 0-200 kgf
Operating Modes Compression only
Sensitivity (RO) 1.5 nominal 2±10% 2±10% mV/V
Maximum Platform Dimensions 200 x 200 350 x 350 400 x 400 mm
Zero Balance/Offset <1 <1 <10 ±%/Rated Output
Creep (30 mins) <0.08 <0.03 ±%/Rated Capacity
Non-Linearity <0.03 ±%/Rated Capacity
Hysteresis <0.02 %/Rated Capacity
Repeatability <0.02 ±%/Rated Capacity
Temperature Effect on Zero <0.005 <0.002 <0.006 ±%/Rated Capacity/˚C
Temperature Effect on Sensitivity <0.015 <0.002 <0.015 ±%/Applied Load/˚C
Effect of Eccentricity <0.015 <0.006 ±%/Rated Capacity/cm
Input Resistance 400 nominal Ohms
Output Resistance 350 nominal Ohms
Insulation Resistance >2000 @ 50Vdc Megohms
Excitation Voltage 10 recommended (2-15 acceptable) Volts AC or DC
Operating Temperature Range -20 to +70 ˚C
Compensated Temperature Range -10 to +40 ˚C
Storage Temperature Range -20 to +70 ˚C
Safe Overload 150 % of Rated Capacity
Ultimate Overload 300 % of Rated Capacity
Deflection @ Rated Capacity <0.5 nominal mm
Resonant Frequency Consult Sales Team
IP Rating (Environmental Protection) IP65: 2kg and below | IP67: 3kg and above
Weight (excluding cable) See dimension table
Fatigue Life 108 cycles typical (109 cycles on fatigue-rated version)
Cable Length (as standard) 0.5 0.4 3 metres
Cable Type 4 core screened, PVC sheath 4 core screened, PVC sheath, 6 core screened, PVC sheath,
Construction Aluminium Alloy
Resolution 1 part in 250,000 (with appropriate instrumentation)

Product Dimension

Capacity (kg)
A
B
C
D
F
G
H
L
Q
V
X
J
 Weight (kg)
0,25, 0.5, 1, 2
70
15
22
46
58
-
7
6
12
-
0.5
M3x0.5 - 22 deep
 0.07
3, 5, 10, 15, 20, 30
130
25.4
22
80
106
-
15
12
25
-
0.4
M6x1 - 22 deep
 0.20
40
130
30
22
80
106
-
15
12
25
-
0.4
M6x1 - 22 deep
 0.24

Wiring Details (Capacities of 2kg and Lower)

Wire Designation
Red +ve excitation
Blue -ve excitation
Green +ve signal
Yellow -ve signal
Screen To ground – not connected to load cell body

Wiring Details (Capacities of 3kg to 40kg)

Wire Designation
Red +ve excitation
Black -ve excitation
Green +ve signal
White -ve signal
Screen To ground – not connected to load cell body

Reviews

There are no reviews yet.

Be the first to review “Platform Load Cell | Single Point Load Cell”

Your email address will not be published. Required fields are marked *

Related products