Apa Fungsi Load Cell Sensor? Ini Penjelasannya

Z-Beam Load Cell | S-Beam Load Cell | High Accuracy | DBB

Category: Tags: ,

Description

Applied Measurements DBB Z-beam load cell / S-beam load cell is suitable for use in tension or compression with IP67 immersion protection to 1m.  The design lends itself to both force and load measurement applications such as those found on tensile testing machines, suspended hoppers and geotechnical test equipment, as well as a wide range of other general-purpose applications.

The sensing principle employed on our Z-Beam load cell varies, with a dual bending beam design on the DBBE model which covers capacities from 50kg up to 1000kg and a shear web design on the DBBWAS model which cover ranges from 0-1500kg to 0-6000kg.  Both sensing principles offer inherently high accuracy and enable us to guarantee performance of better than ±0.03% of rated capacity.

All our DBB models are constructed from nickel-plated alloy steel.

Rod end bearings and load buttons are available (see gallery images) to provide optimum loading conditions.

Feature

  • Capacities: 0-50kg up to 0-6,000kg
  • Output: 2mV/V
  • Environmental Protection: IP67
  • Accuracy: <±0.03%/RC
  • Simple To Install
  • Guaranteed High Performance – With dual bending beam and shear web designs.
  • IP67 Immersion Protection as Standard to 1m
  • Fully Submersible Versions Available – Ideal for permanent marine and offshore applications.
  • Improved Accuracy – Specially designed rod end bearings which reduce extraneous forces.
  • Fast and Simple Installation – With standard or customised mounting bases and design fixtures.

Technical Specifications

DBBE DBBWAS Units
Rated Capacity (RC) 0-50, 0-100, 0-150, 0-200, 0-300, 0-500, 0-1000 0-1500, 0-2000, 0-3000, 0-5000, 0-6000 kg
Operating Modes Tension/Compression/Tension & Compression
Sensitivity (RO) 2.0 ±0.1% mV/V
Zero Balance/Offset <2 ±%/Rated Output
Total Error <0.03 ±%/Rated Output
Zero Return after 30 mins <0.03 ±%/Applied Load
Output Symmetry
(tension vs. compression)		 <0.2 typical ±%/Rated Output
Temperature Effect on Zero <0.003 ±%/Rated Load/˚C
Temperature Effect on Sensitivity <0.0015 ±%/Applied Load/˚C
Input Resistance 400 ±20 Ohms
Output Resistance 350 ±3 Ohms
Insulation Resistance >2000 Megohms @ 50Vdc
Excitation Voltage 10 recommended (2-15 acceptable) Volts AC or DC
Operating Temperature Range -30 to +70 ˚C
Compensated Temperature Range -10 to +45 ˚C
Storage Temperature Range -30 to +70 ˚C
Safe Overload 150 % of Rated Capacity
Ultimate Overload 300 % of Rated Capacity
Deflection @ Rated Capacity <0.4 mm
Fundamental Resonant Frequency* 200 to 1000 typical depending on capacity Hz
IP Rating (Environmental Protection) IP67
Weight (excluding cable) 0.7 kg
Fatigue Life 108 cycles typical (109 cycles on fatigue-rated version)
Cable Length (as standard) 6 metres
Cable Type 6-core screened, PUR sheath, Ø6.3
Construction Nickel Plated Alloy Steel
Resolution: 1 part in 250,000 (with appropriate instrumentation)
*The resonant frequency is calculated with the body of the load cell attached to a large plate, ensuring that only the sensing element oscillates: This is vital to achieve the highest natural frequency and subsequent frequency response.

Product Dimension

Model
Capacity (kgf)
H
L
W
W1 (nom)
H1
Threads T
DBBE
0-50 to 0-1000
80
62.1
18
22
15
M12 x 1.75
DBBWAS
0-1500, 0-2000
90
70
32
36
19
M16 x 2.0
DBBWAS
0-3000, 0-5000, 0-6000
120
100
45
45
26
M24 x 2.0

All dimensions are in mm

Wiring Details

Wire Designation
Red +ve excitation
Black +ve sense
Blue -ve excitation
White -ve sense
Green +ve signal (tension)
Yellow -ve signal

Reviews

There are no reviews yet.

Be the first to review “Z-Beam Load Cell | S-Beam Load Cell | High Accuracy | DBB”

Your email address will not be published. Required fields are marked *

Related products