FF410 Reaction Torque Transducer

Description

The Datum Electronics Series 410 Static (non-rotating or reaction) torque sensors were developed following demand from our customers, looking to measure static or reactionary torque. The FF410 series of static torque sensors use the same basic shaft components and strain gauge technology, that have been applied to our 420 Rotary Torque transducer range, providing a cost-effective torque measurement solution for the static transducer market.

Sensor Torque Transducer  

FF410 Static Torque Sensor Measurement Range The Series 410 Reaction Torque Transducers have been designed with a nominal rated torque level in Nm. Nominally rated torque levels include:

  • 250Nm
  • 500Nm
  • 1,000Nm
  • 2,000Nm
  • 5,000Nm
  • 10,000Nm

Easy to Install within Torque Test Rig The 410 Static Torque Sensor and Reaction Torque Transducer easily fits into your existing test rig or drive train. Using standard DIN flanges, fitting and coupling the static transducer into your rig is made more efficient than other options available. The minimum operating envelope of the Series 410 reaction torque transducer starts from 100mm and will increase depending upon torque measurement requirements.

Spesification

  • Operating Temperature: 0 to +70˚C (+32 to +158˚F)
  • Environmental Protection:  IP54 (IP68 to order)
  • Cable Length: 4m as standard, longer if required
  • Combiner Error: 0.2% FSD
  • Sensitivity: 1.8mV/V (nominal) Hysteresis / Repeatability: 0.1% of FSD
  • Excitation Voltage: 5-15 VDC
  • Max Overload Capacity: 150% of full load
  • Bridge Resistance: 700 ohms (nominal)

Features

  • Accurate On Shaft Torque Measurement
  • Flange Mounted Static Torque Transducer
  • Flexible Rig/Drive Train Fittings (DIN Size Flanges)
  • Ideal Design For Easy Fitting to Test Rigs and Drive Systems
  • Low Maintenance (Lightweight hollow shaft sensor)
  • High Torsional Stiffness Model
  • Standard Torque Sensor Range from 100Nm-10,000Nm
  • Full Bridge Strain Gauge Output (compatible with Datum Type310, Type324, Type 300 Indicators).

Dimension

dimension sensor torsi ff410
      A B C D F G I J
Torque Sensor Size Rated Load (Nm) Rated Load (lb ft) Overall Mass (kg) Shaft Length BodyWidth Flange Dia. Male/Female Flange Coupling Ø H7/h6 TOL (ISO 286) Flange Thickness Number of Holes per Flange Clearance Through Hole ISO 273. Series: Fine Body Dia.
Size 1   0-100 0-75 0.62 97.5 51 100 2.5 8 6 8.4 65
Size 2 – A 0-250 0-200 1.27 97.5 51 100 2.5 8 6 8.4 65
Size 2 – B 0-500 0-400 1.34 97.5 51 100 2.5 8 6 8.4 65
Size 3 – A 0-1,000 0-750 1.81 97.5 51 120 2.5 8 8 10.5 75
Size 3 – B 0-2,000 0-1,500 2.26 107.5 51 120 2.5 8 8 10.5 75
Size 4 – A 0-5,000 0-4,000 6.24 137 51 180 3 12 8 15 90
Size 4 – B 0-10,000 0-8,000 10.01 157 51 185 3 15 8 15 100
Size 5 – A 0-15,000 0-12,000 29.51 216 51 250 5.5 20 8 17 138
Size 5 – B 0-20,000 0-15,000 30.12 216 51 250 5.5 20 8 17 138
Size 5 – C 0-25,000 0-20,000 31.5 216 51 285 6 20 8 19 138
Size 5 – D 0-30,000 0-25,000 32.44 216 51 315 6 22 8 21 138

Reviews

There are no reviews yet.

Be the first to review “FF410 Reaction Torque Transducer”

Your email address will not be published. Required fields are marked *