Square Drive Static Torque Transducer | DTD-S

Square Drive Static Torque Transducer | DTD-S

High Accuracy, Easily Adaptable, with a Square Drive Shaft
Category: Tags: ,

Description

The DTD-S series of reaction / static torque transducers have a square drive and are primarily used to measure the fastening or breakaway torque of bolts and nuts. The square drive static torque transducer is ideal for calibrating automated torque screwdrivers, spanners and wrenches.

We are able to offer custom drive sizes and configurations to suit your application if required, and can also offer versions with improved sealing up to IP68 for applications where operating conditions are harsh or involve submersion.

feature

  • Capacities: 0-10Nm to 0-20kNm
  • 2mV/V Output (1.5mV/V on 50kNm model)
  • Environmental Protection: IP65
  • Accuracy: <±0.1%/Rated Capacity
  • Custom Capacities to 200kNm+
  • High Accuracy – Ideal for Calibration or Testing Torque Tools QA Environment
  • Protected From Low Pressure Water Jets – Suitable for Most Industrial Environments
  • Offshore and Marine Submersible Versions Available
  • Fast and Simple Installation Thanks to Customised Shaft and Configuration Options
  • Let us Customise the Design to Suit Your Exact Application

Specifications

Rated Capacity (RC) Nm 0-10, 0-20, 0-50, 0-100, 0-200, 0-250, 0-500, 0-1000, 0-2k, 0-5k, 0-10k, 0-20k
Operating Modes Clockwise (CW)/Counter-Clockwise (CCW) / Clockwise (CW) & Counter-Clockwise (CCW)
Sensitivity (RO) mV/V 1.5 nominal
Zero Balance/Offset ±%/Rated Output <1
Output Symmetry (CW vs. CCW) ±%/Rated Output <0.25 typical
Non-Linearity ±%/Full Scale Output <0.1
Hysteresis ±%/Full Scale Output <0.1
Repeatability ±%/Full Scale Output <0.1
Temperature Effect on Zero ±Full Scale Output/ ˚C <0.010
Temperature Effect on Output ±/Reading/ ˚C <0.010
Bridge Resistance Ohms 700 nominal
Insulation Resistance Megaohms >5000 @ 50Vdc
Excitation Voltage Volts AC or DC 10 recommended (2-15 acceptable)
Operating Temperature Range ˚C -20 to +80
Compensated Temperature Range ˚C +20 to +70
Storage Temperature Range ˚C -20 to +80
Safe Overload % of Rated Capacity 150
Ultimate Overload % of Rated Capacity 300
IP Rating (Environmental Protection) IP65
Weight See dimensions table
Fatigue Rating 108 cycles typical
Cable Length (as standard) metres 3
Cable Type 4-core screened PUR, Ø4.6mm
Construction Stainless Steel
Resolution 1 part in 250,000 (with appropriate instrumentation)

Product Dimensions

DTD-S Dimensions
Capacity (Nm) Square Drive A B C ØD
10 0.250 inch 7.5 48 25
20 0.250 inch 7.5 48 25
50 0.375 inch 11.5 58 35
100 0.500 inch 15.5 58 35
250 0.750 inch 23 79 54
500 0.750 inch 23 79 54
1000 1.000 inch 28 79 54
2000 1.500 inch 38 95 70
5000 2.000 inch 45 130 90
10000 2.500 inch 55 165 110
20000 3.000 inch 68 212 130
50000 3.500 inch 79 185 180

All dimensions are in mm.

Wiring Details

Wire Designation
Red +ve excitation
Blue -ve excitation
Green +ve signal (clockwise)
Yellow -ve signal
Screen To ground - not connected to sensor body

ORDERING CODES & OPTIONS

Core Product Capacity (inc Engineering Units) Cable Length (m) Specials Code Example Result
DTD-S 10Nm 003 000 DTD-S-10Nm-003-000
DTD-S 20Nm 003 000 DTD-S-20Nm-003-000
DTD-S 50Nm 003 000 DTD-S-50Nm-003-000
DTD-S 100Nm 003 000 DTD-S-100Nm-003-000
DTD-S 200Nm 003 000 DTD-S-200Nm-003-000
DTD-S 250Nm 003 000 DTD-S-250Nm-003-000
DTD-S 500Nm 003 000 DTD-S-500Nm-003-000
DTD-S 1000Nm 003 000 DTD-S-1000Nm-003-000
DTD-S 2000Nm 003 000 DTD-S-2500Nm-003-000
DTD-S 5000Nm 003 000 DTD-S-5000Nm-003-000
DTD-S 10kNm 003 000 DTD-S-10kNm-003-000
DTD-S 20kNm 003 000 DTD-S-20kNm-003-000

Reviews

There are no reviews yet.

Be the first to review “Square Drive Static Torque Transducer | DTD-S”

Your email address will not be published. Required fields are marked *

Related products