SmartSolo IGU-16HR 3C

Category:

Description

 

The seismic industry continues to demand that exploration is carried out at ever-greater scale and receiver density, while somehow attempting to balance the requirement to keep project costs under control. To provide the industry with asolution to this challenge, SmartSolo Inc. has dveloped the SmartSolo intelligent seismic sensor. 

SmartSolo is based on DT-SOLO, the high-sensitivity geophone and focuses on the principal of seismic exploration which is known as 3W(Wave = high fdelity signal;When = accurate timing;and Where = the location), incorporated with electronics and software technologies in mobile internet era. 

This smart sensor provides adequate info for highest-quality seismic data acquisition while keeping its functions and structure as simple as possible. Electronics and software technologies are super reliable, mature and cost-efective in mobile internet era. These technologies are used for SmartSolo at maximum possible scale. The result: the geophone is something smart, reliable, user-friendly, cost-effective and could run in any harsh environment.

High-quality seismic data derives from high-quality seismic sensors. DT-SOLO is a high-sensitivity geophone specially designed for point receiver applications. It is well-known in the seismic industry as the top-quality high-sensitivity geophone which is widely used by contractors and equipment manufacturers. 

  • High Quality
  • High Sensitivity
  • Super Reliable
  • Greater Savings
  • Low Distortion
  • Single Point Receiver
  • Industry Leader

Main Features

  • New Generation Smart 3 Components Seismic Sensor
  • Small Footprint 95mm X 103mm
  • Built-in GPS receiver and disciplined high precision clock
  • Based on the most highly regarded DT-SOLO HS geophone with 10Hz and 5Hzoptions
  • Most cost effective system on the market
  • Light weight and compact size
  • Share the same peripherals as IGU-16, IGU-16HR, Greater equipment investmentsavings
  • All-In-One Modular design provides maximum productivity, maintenance free operation and easy battery replacement
  • Suitable for one station to million station operations
  • Up to 30 days of continuous recording (see Technical specs for details)
  • Compatible with vibroseis and impulsive energy sources
  • Simple LED State Indicator. Green for”good to go”and Red for”no good”

Specifications

Physical Specs
Parameters Specification
Seismic data channel(s) 3
ADC resolution 32 bits
Sample intervals 0.25, 0.5, 1, 2, 4, 8, 10, 20 milliseconds
Preamplifier gain 0dB to 36 dB in 6 dB steps
Anti-alias filter 206.5 Hz @ 2ms (82.6% of Nyquist)
Selectable – Linear Phase or Minimum Phase
DC blocking filter 1Hz to 10Hz, 1Hz increments or DC Removed
Operating temperature -40°C ~ +70°C
Waterproof IP67
Physical Size 103mm(L) × 95mm(W) × 187mm(H)(w/o spike)
Weight 2.4kg(Including internal battery and spike)
Data Storage 64GB
Operating Life@25°C 30 days Continuous@ 2ms
60 days Segmented (12hours ON/12hours SLEEP) @ 2ms
Recharge Time <6hours
Charging Temperature Range +3°C ~ +45°C

 

Channel Performance
Parameters Specification
(@ 2ms sample in terval, 31.25 Hz, 25°C, unless otherwise indicated)
Maximum Input Signal ±2.5Vpeak @ Gain 0dB
Dynamic Range 125dB @ 2ms Gain 0dB
Equivalent Input Noise 0.18µV @ 2ms Gain 18dB
Total Harmonic Distortion <0.0002% @ Gain 0dB
Common Mode Rejection >100dB
Gain Accuracy <1%
GPS Time Standard 1ppm
Timing Accuracy ±10µs, GPS Disciplined
Cross Feed < -110dB
System Dynamic Range 145dB
Frequency Response 0 ~ 1652Hz

 

Acquisition Performance
Parameters Specification
Natural Frequency 5Hz 10Hz
Spurious Frequency >170Hz (>150Hz in horizontal sensor) 240Hz
Distortion <0.1%@12Hz, (0° ~ 10°) vertical <0.1%@12Hz, (0° ~ 10°) vertical
tilt, (0° ~ 3°) horizontal tilt tilt, (0° ~ 3°) horizontal tilt
Damping 0.7 0.7
Sensitivity 76.7 V/m/s (1.95 V/in/s) 78.7 V/m/s (2.0 V/in/s)
Remark All parameters are specified at +22°C in the
vertical position for vertical geophone and
horizontal position for horizontal geophone
unless otherwise stated.		 All parameters are specified at +25°C in the
vertical position for vertical geophone and
horizontal position for horizontal geophone
unless otherwise stated.

Reviews

There are no reviews yet.

Be the first to review “SmartSolo IGU-16HR 3C”

Your email address will not be published. Required fields are marked *

Related products