SmartSolo IGU-BD3C-5

SmartSolo IGU-BD3C-5

Category:

Description

IGU-BD3C-5 is a low-cost, broadband, and micro power consumption broadband smart seismic sensor. Based on the high-sensitivity geophone DT-SOLO proudly produced by SmartSolo Inc, and incorporated with electronicsand software technologies in mobile internet era. With internationally well-received and reliable electronic spread spectrum technology, the frequency band range of IGU-BD3C-5 is up to 0.2Hz-150Hz. 

Due to its high reliability and high level of customization of storage and power capacity, it is very suitable not only for traditional active seismic exploration, but also for long-period observation of natural microseismic, transient surface wave survey and mobile station natural earthquake monitoring, etc.

High-quality seismic data derives from high-quality seismic sensors. DT-SOLO is a high-sensitivity geophone specially designed for point receiver applications. It is well-known in the seismic industry as the top-quality high-sensitivity geophone which is widely used by contractors and equipment manufacturers. 

  • High Quality
  • High Sensitivity
  • Low cost
  • Super Reliable
  • Greater Savings
  • Low Distortion
  • Single Point Receiver
  • Industry Leader

Main Features

  • New Generation 3 components Smart Seismic Sensor
  • Low frequency can reach to 5s
  • Internalbattery support up to 30 days of continuous recording (see Technical specs for details)
  • Support for external power supply and Bluetooth QC
  • Built-in GPS receiver and time-disciplined high precision clock
  • High resolution data with up to 0.25ms sampling and 32-bit delta-sigma ADC
  • Real-time seismic data monitoring and sensor status QC
  • Internal 64GB memory Can be expanded to 128GB
  • Dual LED for status QC Indicate Bluetooth, battery level and working status
  • Compatible with vibroseis and impulsive energy sources

Specifications

Physical Specs
Seismic data channel(s) 3
ADC resolution 32 bits
Sample interval 0.25,0.5,1,2,4,8,10,20 ms
Instrument Noise Floor Whole frequency band lower than the NHNM curve
5s~1Hz lower than the NLNM curve
Operating temperature -40°C ~ +70°C
Waterproof IP68
Physical Size Φ158 x160mm (w/o spike)
Weight 2.8 kg (Including internal battery and spike)
Data Storage 64GB (can be expanded to 128GB)
Operating Life@25°C 30 days Continuous
60 days Segmented (12h ON/12h SLEEP)
External Power Supply 7V~ 15V (single supply)
Bluetooth QC Available
Data Harvesting USB 3.0
Charging Temperature Range +3°C~ +45°C
Charging Time <7.5H, Fully Charged (Standard battery)

 

Acquisition Performance
Frequency Bandwidth 0.2Hz ~ 150Hz
Distortion <0.1% @12HZ (0°~ 10°) tilt, (0°%~3°) horizontal tilt
Sensitivity 200V/m/s (5.08 V/in/s)
Remark All parameters are specified at +22°C in the vertical position
and horizontal position for horizontal geophone unless
otherwise stated

 

Channel Performance
(@ 2ms sample interval, 31.25 Hz, 25°C, unless otherwise indicated)
Maximum Input Signal ±2.5Vpeak @ Gain 0dB
Instantaneous Dynamic Range 120dB@ Gain 0dB
Common Mode Rejection >100dB
Gain Accuracy <1%
GPS Time Standard 1ppm
Timing Accuracy + 10μS, GPS Disciplined
Cross Feed <-110dB
Inter-channel Phase Offset <0.1ms
Transverse Vibration Rejection Better than 0.1%
Inter-channel Amplitude Coherence 5%
System Dynamic Range 140 dB
Frequency Response 0~1652Hz

Reviews

There are no reviews yet.

Be the first to review “SmartSolo IGU-BD3C-5”

Your email address will not be published. Required fields are marked *

Related products